Fluke

  • Filter
Category: Pressure
Created on: 12 February 2014

Adjustable from 725 to 5800 PSI (50 to 200 bar) Preset at 2,900 psi/200 bar) Repeatability to 10% of nominal setting. Installs directly into the 700HTP-1 pump

Category: Pressure
Created on: 12 February 2014

Pump can be easily cleaned without disassembly The vernier can be used as a stand-alone low pressure calibration source Two pressure ports allowing simultaneous connection  ¼ -NPT female fitting for the reference gauge or pressure module ¼” NPT female fitting for the unit under test Adjustable stroke length can be set to limit the pressure per stroke Includes 1/4 in NPT male to 1/4 in BSP female 1 meter of hose (2) 1/8 in NPT male quick connects 1/8 NPT female to 1/4 in BSP female Seal Kit Instruction sheet

Category: Pressure
Created on: 12 February 2014

Compatible with the 717 and 718 calibrators 100 PSI and below The kit contains: three translucent hoses one meter long easy to connect push fit connectors for both connect ion to the calibrator and the device under test one 1/8 to ¼ NPT female-female adapter.

Category: Rack Mounts
Created on: 12 February 2014

Enables mounting two meters side-by-side in a standard 19-inch rack

Category: Rack Mounts
Created on: 12 February 2014

Enables mounting two meters side-by-side in a standard 19-inch rack

Category: Software
Created on: 12 February 2014

Enables data download and logging configurations to the 700G Series gauges for a remote logging event Configure logging event reading rate, duration and measurement units Upload measurements logged remotely and display or export measurements Includes communication cable for connection to a PC and CD-Rom user manual

Category: Software
Created on: 12 February 2014

FlukeView Forms supports the following meters: Fluke 1550B MegOhmMeter Fluke 1653 / 1653B Electrical Installation Tester Fluke 180 series Fluke 287 and 289 Fluke 45 Fluke 53-II and 54-II Fluke 568 IR Thermometer Fluke 789 ProcessMeter Fluke 8808A Fluke 8845A/8846A Fluke 89-IV and 87-IV Fluke 975 AirMeter Test Tool Fluke 983 Particle Counter

Category: Software
Created on: 12 February 2014

FlukeView Forms supports the following meters: Fluke 1550B MegOhmMeter Fluke 1653 / 1653B Electrical Installation Tester Fluke 180 series Fluke 287 and 289 Fluke 45 Fluke 53-II and 54-II Fluke 568 IR Thermometer Fluke 789 ProcessMeter Fluke 8808A Fluke 8845A/8846A Fluke 89-IV and 87-IV Fluke 975 AirMeter Test Tool Fluke 983 Particle Counter