You have 0 items in your cart.
Madgetech
Sub Categories
Split core current switch, monitors 3.5-100Amps, adjustable set point between 3.5-100Amps, auto calibration, and status LED's.
Split core current switch, monitors 1.5-150Amps. Adjustable set point and status LED's.
Split Core current switch, monitors 1.5-250Amps, sensor trips at 1.5Amps. Switch can be used for both AC and DC circuits.
Solid core current switch, monitors 1-250Amps, sensor trips at 1Amp. Switch can be used for both AC and DC circuits.
The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert, then tighten the six screws again and it’s ready to use.
The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use, simply unscrew the 6 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert and tighten the six screws again, and it’s ready to use.
The ThermoVault140 is an extreme high temperature data logging system, for use with a HiTemp140 data logger and stainless steel thermal barrier enclosure. This durable system can withstand temperatures up to 250°C when completely submerged and 350°C in dry heat applications (O-ring removed). The ThermoVault140 is built for use in harsh applications that require extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging. The ThermoVault140 is available in multiple probe sizes. The 5.25” probe is ideal for ambient temperature monitoring, while the 24” flexible probe can be easily adjusted to measure hard-to-reach locations, or even the internal temperature of a product.
The ThermoVault1000 is a stainless steel thermal barrier for use with the Temp1000P or Temp1000FP data loggers. This durable enclosure is submersible and can withstand temperatures of up to 350°C (230°C with O-Ring). This device is easy to install. Simply open the enclosure, insert the data logger, thread the probe through the end cap and latch it back onto the barrier body. The ThermoVault1000 is built for use in applications that require extreme temperature monitoring, such as with furnace profiling, geothermal down-hole recording, and oven data logging.