You are here: Home Products By Brands MEGGER-UK By Brands BANTE Ion Meters Multi-parameter Water Quality Meters BANTE 900P Portable Multi-parameter Water Quality Meter
31

BANTE 900P Portable Multi-parameter Water Quality Meter

Category: Multi-parameter Water Quality Meters

Bante900P multi-parameter meter is capable of measuring up to

9 water quality parameters, including pH, ORP, Ion, Conductivity

TDS, Salinity, Resistivity, Dissolved Oxygen, etc.

   

General Features:

Automatic Temperature Compensation (ATC) ensures highly

    accurate measurements over the entire range.

Calibrationdue reminder helps you to calibrate meter regularly.

Automatic endpoint function freezes stable measured values.

Help message as a operational guide to helps you understand

    how to use meter.

Setup menu lets user customize the calibration points, stability

    conditions, date and time to meet measurement requirements.

Expanded memory stores and recalls up to 500 readings.

Built-in real-time clock stamps stored data to meets GLP.

Stored data can be transferred into PC via USB communication

    interface.

pH Mode:

Up to 5 points push-button calibration with auto-buffer recognition.

Selectable pH buffer standards, resolution and temperature units.

Automatically calculates and displays electrode slope that helps you

    decide whether to replace pH electrode.

ORP Mode:

Single point offset calibration allows user adjusts displayed value to

    a known standard.

Absolute or Relative mV measurements provides accurate readings.

       

Ion Mode:

Standard BNCconnector can connects manyIon Selective Electrode.

2 to 5 points push-button calibration from low to high concentrations.

Selectable multiple concentration units, including ppm, mg/L, mol/L.

Direct readout ion concentration simplifies measurement process.

mVmeasurement allows user tocheckperformance of ion electrode.

Conductivity/TDS/Salinity Mode:

Up to 5-point push-button calibration allows user to uses customized

    calibration solutions.

Adjustable TDS factors,cell constants, temperature coefficients and

    normalization temperature.

Selectable linear or pure water compensation modes.

In salinity measurement modes,selectable practical salinity(PSU) or

    seawater measurement standard (ppt).

Dissolved Oxygen Mode:

1 or 2 points auto-calibration (100% in saturated air or air-saturated

    water, 0% in zero oxygen solution).

Manual salinity and barometric pressure compensation.

Selectable readout in ppm, mg/L or percentage saturation.

       

　
　 Specifications: 　 　 　
　    Model 　 Bante900P 　 　 　
   pH Range 　 -2.000~20.000pH
   pH Accuracy 　 ±0.002pH
   Resolution 　 0.001, 0.01, 0.1pH, Selectable
   Calibration Points 　 Up to 5 points
   Calibration Solutions 　 USA(pH1.68/4.01/7.00/10.01/12.45), NIST(pH1.68/4.01/6.86/9.18/12.45), DIN(pH1.09/4.65/6.79/9.23/12.75)
   Ion Concentration Range 　 0.001~19999ppm, mg/L, mol/L (Depending on measuring range of Ion Selective Electrode)
   Ion Concentration Accuracy 　 ±0.5% Full Scale (Monovalent), ±1% Full Scale (Divalent)
   Calibration Points 　 2 to 5 points
   Calibration Solutions 　 0.001, 0.01, 0.1, 1, 10, 100, 1000, 10000ppm, mol/L, mg/L
   mV Range 　 -1999.9~1999.9mV
   mV Accuracy 　 ±0.2mV
   Resolution 　 0.1, 1mV, Selectable
   Conductivity Range 　 0~20mS/cm (Max.200mS/cm)
   Conductivity Accuracy 　 ±0.5% Full Scale
   Calibration Points 　 Up to 5 points
   Calibration Solutions 　 10uS/cm, 84uS/cm, 1413uS/cm, 12.88mS/cm, 111.8mS/cm
   TDS Range 　 0~10ppt (Max. 20ppt, Depending on factor setting)
   TDS Accuracy 　 ±1% Full Scale
   TDS Factor 　 0.1~1.0 (Default 0.5)
   Salinity Range 　 0~10ppt (Max.80ppt)
   Salinity Accuracy 　 ±1% Full Scale
   Salinity Measurement Modes 　 Practical Salinity (PSU) or Seawater Measurement Standard (ppt)
   Resistivity Range 　 0~100MΩ
   Resistivity Accuracy 　 ±1% Full Scale
   Resolution 　 0.001, 0.01, 0.1, 1, Automatic
   Temperature Coefficient 　 0.0~10.0% per °C
   Compensation Modes 　 Linear or Pure Water
   Cell Constant 　 K=0.1, 1, 10, Selectable
   Normalization Temperature 　 20°C or 25°C
   Dissolved Oxygen Range 　 0.00~20.00mg/L or ppm
   Resolution 　 0.01, 0.1mg/L, Selectable
   Dissolved Oxygen Accuracy 　 ±0.2mg/L (Calibration and measurement under the conditions of same temperature)
   % Saturation of Oxygen 　 0.0~200.0%
   Accuracy 　 ±2.0%
   Salinity Correction 　 0~50g/L
   Pressure Correction 　 60.0~112.5kPa, 450~850mmHg
   Temperature Range 　 0~105°C, 32~221°F
   Temperature Accuracy 　 ±0.5°C, ±0.9°F
   Temperature Calibration 　 Manual
   Temperature Compensation 　 0~100°C, 32~212°F, Automatic or Manual; DO Mode: 0~50°C, 32~122°F, Automatic
   Auto-Off 　 Manual or Automatic (10, 20, 30 minutes after last key pressed, Selectable)
   Hold Function 　 Manual or Automatic
   Stability Conditions 　 Low or High, Selectable
   Calibration due reminder 　 0 to 30 days
   Reset Function 　 Yes
   Memory 　 500 data sets with Date/Time stamping
   Output 　 USB Communication Interface
   Connector 　 BNC and 6-pin connector
   Power Requirements 　 3×1.5V "AA" Batteries
   Battery Life 　 Approximately 150 hours
   Dimensions 　 170(L)×85(W)×30(H)mm
   Weight 　 300 grams
　 　 　
　 Order Code and Accessories: 　
　    Order Code 　 Accessories 　
　

   Bante900P-UK 

 

P11 Glass pH Electrode (Made in UK)

K10 Conductivity Electrode (Made in UK)

DO100 DO Probe (Made in US)

TP-10K Temperature Probe

pH Buffer Pouches (pH4.01, 7.00, 10.01)

Conductivity Calibration Solutions (146uS/cm, 1413uS/cm, 12.88mS/cm)

Carrying Case and “AA” Batteries

 　

   Bante900P-CN

  

E65-1-BNC Glass pH Electrode

CON-1 Conductivity Electrode

DO100 DO Probe (Made in US)

TP-10K Temperature Probe

pH Buffer Pouches (pH4.01, 7.00, 10.01)

Conductivity Calibration Solutions (146uS/cm, 1413uS/cm, 12.88mS/cm)

Carrying Case and “AA” Batteries

Location

Ask about this product