Sub Categories
The integrated oxidation & titration design and the sequence control function simplified operations Smaller waste solution (lower than 10mL per measurement) Real time display of sequence and titration curve Meas. range 0 - 20.0/40.0/100/200/400/1000 mg/L
Enables bacteria and cell measurements in 50 sec. Highly sensitive measurement at 1 - 1000 cells/mL level Enables direct measurement of membrane filter Compliant to sanitary management by swap test Useful functions such as ATP concentration and cell converted value available Automatic reagent dispenser is optional (DF-10 sold separately)
Industrial pH Transmitter HDM-135A(2-wire)/HDM-136A(4-wire) Easy-to-use pH analyzer for field installation in a compact and rigid aluminum enclosure Easier calibration done with standard solution Auto determination of electrode deterioration Alterable output range Automated self-diagnosis of fault (burn-out output) Meas. range -1 - 14
Industrial ORP Transmitter HDM-137A(2-wire)/HDM-138A(4-wire) Easy-to-use ORP analyzer for field installation in a compact and rigid aluminum enclosure Automatic check done with standard solution Auto-detection of electrode deterioration Alterable output range Automated self-diagnosis of fault (burn-out output) Meas. range -2000 - +2000mV
pH / ORP Transmitter with HART Interface HBM-165H(2-wire) HART communication protocol interface with a 2-wire, 24 VDC circuit Available for both pH and ORP measurements Diecast aluminum enclosure, digital display and a wide range of other useful features One-touch auto calibration Self-diagnostic function Meas. range -1.00 - 15.00 ORP -2000 - 2000 mV
Industrial pH/ORP Transmitter HBM-160/HBM-162(4-wire) Multi-function pH/ORP analyzer for field installation in a compact aluminum diecast enclosure One-touch calibration and various self-diagnostic functions 2-point contact signal and 2-channel output including temperature (RS-232 optional) Power supply: AC90~264V, 50/60Hz Meas. range pH meter (HBM-160) : pH -1 - 15 ORP meter (HBM-162) : ORP -2000 - +2000mV
Immersion Type Holder for Replaceable Tip Electrode HC-G70 (KCl Replenish-Free/Refillable) / HC-G72 (KCl Refillable) HC-G70: Transparent PVC holder (heat resistance: 60 degrees C) and semi-transparent PP holder (heat resistance: 80 degrees C) available HC-G72: SUS316 holder (heat resistance: 80 degrees C) Length: 0.5 - 3.0m KCl refillable type stores KCl inside the holder Mounting bracket/flange available
Drop-In Type Detector for Replaceable Tip Electrode HC-G95 (KCl Replenish-Free) Two selections: throw-in type for deep tanks or drop-in type with a protection pipe Made from transparent PVC (heat resistance: 60 degrees C) SUS protection pipe (maximum length: 5 m) and mounting bracket available



































