You have 0 items in your cart.
By Brands
Brands
Sub Categories
Fluke 62 Max+ Infrared Thermometerwith Dual-point Laser Sighting (More Info>>) Wide temperature range from -30° to 650°C (–20° to 1202°F) 12:1 distance-to-spot ratio ±1% Accuracy of the reading. Dual, rotating lasers to accurately identify spot size Rugged performance Survives 9.8 foot/3 meter drops to wood floors Water and dust resistance IP54 rated to withstand rain, splashing liquids, dust and dirt Small and easy to use Ergonomic fit to "feel" good in your hand Multi-angle Fluke T5-600 600V Voltage, Continuity and Current Electrical Tester (More Info >>) Automatically measures volts ac and volts dc with precise digital resolution Displays resistance to 1000Ω Easy and accurate OpenJaw current measurement Continuity beeper Rugged enough to withstand a 10-foot (3m) drop Detachable SlimReach probe tips Test leads accept Fluke accessory test clips Can stay connected much longer than solenoid type tester Auto off mode to conserve battery life Fluke 1AC-A1-II Non-Contact Voltage Tester (More Info >>) Fits in a shirt pocket for convenience Detects 90 to 1000 VAC All outer surfaces...
For the complete solution to HVAC troubleshooting, the extra value-packed 116/62 MAX+ HVAC Technician’s Combo Kit, provides the ability to troubleshoot and solve problems more efficiently by providing all the needed accessories an HVAC professional would need in a compact carry case.
Current Range: 0.1 to 100A DC or 0.1 to 70A AC Basic Accuracy (DC to 1kHz): 100mV/A setting: 50mA to 10A +/- 3% of reading + 50mA 10mV/A setting: 50mA to 40A +/- 4% of reading + 50mA40A to 80A +/- 12% of reading + 50mA80 to 100A +/- 15% of reading Output Signal: 10A range: 100mV/A | 100A range: 10mV/A Bandwidth: 1Hz to 20kHz Working Voltage: 600V AC rms Maximum Conductor Size: 1.8 mm (.46 inch) diameter Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Current Range: 1 to 600 A DC or AC Peak Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A) Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A Frequency Range: 40 Hz to 400 Hz Working Voltage: 600 V AC rms Maximum Conductor Diameter: 34 mm (1.34 inch) Safety Rating: IEC 1010 and CSA-C22.2 No. 1010-1 Installation Category II, Working Voltage 600V
Current Range: 100mA to 1000 Arms Basic Accuracy 48Hz to 65Hz: 10A Range +/- 3% of reading + 0.1A, 100mV/A output 100A Range +/- 2% of reading + 0.5A, 10mV/A output 1000A Range +/- 1% of reading + 1A, 1mV/A output Bandwidth: 5Hz to 100kHz Working Voltage: 600V AC rms Maximum Conductor Size: 54 mm (2.13 inch) diameter Safety Rating: 600V rms. CAT III per IEC 1010-02-032
Battery-powered dual Hall-effect, clamp-on probe measures dc current from 1-1000A; ac current from 1-600A ac rms Measures ac and dc current down to 1 amp with specified accuracy and is useable to 0.5A Output is 1 mV per amp dc or ac Jaws accept conductor size of 1 X 750 MCM ( 30 mm/1.18 in. diameter) or 2 X 500 MCM (2 X 25 mm/.98 in.) AC and DC accuracy: ± (2.0% of reading + 0.5A)
i1010 1-600A AC rms, 1-1000A DC Current Clamp Zippered vinyl carry case with moveable divider
Companion to a DMM to measure up to 200 A AC 1mA per Amp output guarantees easy reading on you meter Take accurate current readings without breaking the circuit Max. conductor Ø 20 mm CAT III 600V safety rating