You have 0 items in your cart.
Products
*Color OLED 320x240 Pixels Display *Live Simultaneous Color A-Scan and Thickness Display *Control of Gain, Blanking, Gate, Range, Delay, RF and Rectify Modes *Time-based B-Scan Display *Echo-Echo Mode,Thru Paint & Coatings
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICTOR TECHNICAL SPECIFICATIONS: Measuring Range (for steel) Interface-Echo Mode: (I-E or Standard Mode) 1.50mm – 20.0mm (0.059in – 0.787 in) Echo-Echo Mode: (E-E or High Precision Mode) 0.15mm – 10.0mm (0.006in – 0.394in) Measuring Accuracy ±0.005mm or 0.0002 inch (if thickness < 3mm) ±0.05mm or 0.002 inch (if thickness < 20mm) Display Resolution mm : 0.1 / 0.01 / 0.001 inch : 0.01 / 0.001 / 0.0001 Sound Velocity Range 1000 to 9999 m/sec (0.0394 – 0.3936 inch/ms) Measuring Refresh Frequency 4Hz in normal mode, up to 25Hz Memory Capacity 500 test values Multiple Calibrations One point or Two Point Display LCD 42×57mm LCD size with EI backlight and adjustable contrast, font size up to 13.75mm (0.54 inch) Power...
HIGH ACCURACY AND RESOLUTION UP TO 0.001mm or 0.0001 inch MEASURING ULTRA THIN SAMPLE AS LOW AS 0.15mm or 0.006 inch DISPLAY UNITS : IMPERIAL and METRIC AUTOMATIC SELF CALIBRATION COUPLANT INDICATOR AUTOMATIC POWER OFF DEVICE HIGH-LOW LIMIT ALARM LCD BRIGHTNESS ADJUST LOW BATTERY INDICATOR STANDARD DELIVERY: Main Processor with Calibration block (4.00 mm) Precision Probe (D11R) with Replaceable Delay Tip Coupling Paste Operation Manual Consumer-Type 2 AA Type Alkaline Battery (3 Volt) Carrying Case
Specifications H cross hatch cutter is applicable to determine the adhesion of organic coatings by cross-hatching. This instrument is designed for assessing the resistance of paint or related coatings to separation from substrates when a right-angle lattice oattern is cut into the coating, penetrating through to the substrate. The Cross Hatch Cutters conform with the requirements of :BS 3900 E6;BS/EN ISO 2409;ASTM D 3359;GB/T 9286, ,it is economy. Main Technical Parameters: 1.Six working side blades:When the blade edge is not sharp enough, users can loosen the boat type nut and top thrust screw to change blade. 2.Multi-cutting blades spacing:1mm/2mm/3mm 3.The number of square:25squares/100squares
TEN810-Datalogging Large Wall Display Temperature /Humidity Monitor with 95dB Sound Alarm/Controller
Complete environmental monitor and alarm - Wall-Mounted LED type, easy reading - Alarm set for Hi and Low limit-Temperature and Humidity - Data Logging Capacity 30,000 records - LED displays real time data - USB interface- XL Display: 260 x 178 x 47mm- High Accuracy and high sensitivity
The accurate TST0189/190 alarm hygrometer reliably indicates when humidity and temperature limits have been exceeded, for example in garden centres, warehouses, cleanrooms, museums, laboratories etc. All the benefits of TST0189 High accuracy ±2 %RH (TST0190) TST0190 with LED alarm, warns if limits are exceeded Storage temperature -40 to +70 °C Operating temperature -10 to +70 °C Battery type 9V block battery Battery life 8736 h Weight 168 g Material/Housing ABS Probe type NTC Meas. range -10 to +70 °C Resolution 0.1 °C Probe type humid. sensor, cap. Meas. Range +2 to +98 %RH Resolution 0.1 %RH
Hanging and standing bracket allows felxible positioning on a wall or desktop Analysis of past temperature and humidity values directly on site without evaluation on a PC All important values at a glance: current and past temperature and humidity values as well as date and time
Precise measurement of temperature, humidity and pressure All important values at a glance: current measurement values as well as date and time Calibration and adjustment of the measuring instrument possible on site with the optional calibration and adjustment software Adjustable calibration reminder function