You have 0 items in your cart.
Products
Sub Categories
● 5V~1000V AC Microprocessor-controlled smart voltage detector.● Bright LED and audible alarm sound when voltage is present.● Designed for non-contact voltage detection.● Sensitivity adjustable with thumbwheel.● Adjustable for use on power wiring plus lighting, thermostats and other low voltage circuits.● LED indication for battery condition.● Identify Hot and Neutral.
GREENLEE GT-12 POCKET 50-1000V AC VOLT-TICK AUDIO/ VISUAL NON CONTACT VOLTAGE DETECTOR INCLUDES (2) AAA BATTERIES (REPLACES GT-11) CAT IV (OBSOLETE***REPLACED BY GT-12A)
FEATURES ● Bright LED and audible alarm sound when voltage is present.● Designed for non-contact voltage detection.● Can be used to find a break in a wire.● Flashlight function.● ON/OFF switch for longer battery life.
DH-10C is designed to measure specific gravity of electrolytic solution of a lead storage battery with easy operation. Taking measurements with DH-10C requires absorption of sample from the tip of nozzle and press "START" key. Right after the oparation, the temperature compensated specific gravity of dilute sulfuric acid is displayed on the screen. Display of temperature " Celsius" and specific gravity can be selected by pressing "SELECT" key.
SBS-2500 offers accurate, temperature-compensated, specific gravity results within seconds. Field studies have shown time savings of over 5 times (500%) using the SBS2500 digital hydrometer versus a standard glass hydrometer and thermometer. This unit will pay for itself in no time! In addition, the SBS-2500 can store 1,100 results internally and includes software that enables the user to download the results for your battery records. SBS-2500 Specifications Method of Detection Specific gravity; oscillating tube method Temperature User defined temperature correction Range 0.00-2.00 Indicator High resolution dot matrix display; specific gravity, temperature Measuring Time Within 3 seconds Power Supply (2) AAA batteries - approx. 90 hours battery life Calibration With dry air or pure water Accuracy 99.999% Dimensions (LxWxH) 9" x 4.5" x 2.5" (228.6 x 114.3 x 63.5 mm) Weight 12.7 oz (360 g) Suction Nozzle 111.8" Long x 1/8" Diameter Model Description SBS-2500 SBS SBS-2500 Digital Specific...
24 V Loop power supply HART mode setting with loop power (adds 250 ohm resistor) 100 % larger dual display 1,200 ohm drive capability on mA source Enhanced backlight with two brightness settings 0-100 % mA Span Check buttons to toggle between 4 and 20 mA Infrared I/O serial port compatible with FlukeView® Forms Software Version 2.1 (available Feb. 2003) Externally accessible fuses for easy replacement DMM designed to meet 1000 volt IEC 1010 CAT III standards Precision 1000 V, 440 mA true-rms digital multimeter Frequency measurement to 20 kHz Min/Max/Average/Hold/Relative modes Diode Test and Continuity Beeper Simultaneous mA and % of scale readout 20 mA dc current source / loop calibrator / simulator Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp Externally accessible battery for easy battery changes Fluke combined a loop calibrator and a DMM to give process technicians double the power in one tool (the Fluke 787). Now we made it even better – the ultimate loop calibration multimeter – the Fluke 789 ProcessMeter. The 789 has a display that's not only twice as large, but also twice as bright with two levels of backlighting. With its...
4-20mA, 0-20mA, 0-24mA with 1 m A resolution 0-100mV with 10 m V resolution 0-12V with 1mV resolution Thermocouple K,J,E,T TYPE 1 o C 1 o F resolution Frequency 2 - 50,000Hz
iCal is a multifunction calibrator and an arbitrary function generator Unique mapping function allows direct calibration of voltage and temperature Source: mA(4 to 20mA), V(0 to 15V, 0 to 70mV), Hz, sine wave, square wave, triangular wave, truncated sine wave, and user programmable waveforms Measurements: Current (mA), voltage (V, mV), temperature (°C, and °F) Frequency range: (0.3 Hz to 20 kHz) Programmable frequency and phase synthesis of single tone and DTMF for devices such as MP3, MD, and telephone lines The Function Generator can examine transistor DC bias characteristics, and amplifier overload and transient characteristics The iCal can be programmed with a PC or Laptop via the USB port All calibration results can be saved in iCal's memory (2000 records) Data can be saved under different file names for efficient record keeping