You have 0 items in your cart.
Madgetech
Sub Categories
The WaterBox101A is a weatherproof enclosure designed for use with MadgeTech’s 101A series data loggers. The enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The WaterBox101A is machined out of black anodized aluminum, and has four oval mounting holes for easy surface attachment. The enclosure features a water-tight communication access plug with chain attachment, stainless steel probe outlet and a clear plastic cover. To use, simply unscrew the 6 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert and tighten the six screws again, and it’s ready to use.
The Waterbox110C is a water resistant enclosure designed for use with the 110 series data loggers. This enclosure provides a water tight seal, allowing non-water resistant data loggers to be used in wet environments. The Waterbox110C is machined out of black anodized aluminum, and is wall mountable. The enclosure features a water-tight communication access plug and cable gland outlet. To use, simply unscrew the 4 hex screws and insert the data logger. Loosen the compression fitting and thread the sensor lead wire through the fitting. Attach the probe to the data logger and insert, then tighten the six screws again and it’s ready to use.
24 gauge, teflon insulated, thermocouple with mini plug and welded tip. Available in type J, K, T, and E, with a 36" or 72" cable.
304 SS 3/16" dia. Available in types J, K and T with a 6" or 12" sheath. Temperature range for sheath: 900°C Temperature range for lead wire: 260°C
30ml, 60ml and 250ml Glycol Bottles with Thermocouple Probe Assembly
The HP-1 is an oven hotplate thermocouple that is designed for monitoring and recording the temperature of stove top griddles, burners and other flat surfaces. It can measure temperatures up to 390°F (200°C) and may be used with electric stoves. To use, simply connect the HP-1 to a thermocouple based temperature data logger, such as the TC101A or TCTemp2000, then start the logger. Place the HP-1 directly on the flat surface, and position the data logger a safe distance away from the heat source. Once monitoring is complete, data can be downloaded and analyzed using the MadgeTech data logger software.
The pH-RUGGED ELECTRODE is a submersible CPVC pH electrode that is suited for use in outdoor applications such as monitoring drums, tanks or streams. The electrode has a quick latch mechanism which allows it to be inserted into a BNC connector by simply rotating it a quarter turn. For use with the MadgeTech pH loggers, a cable assembly and an RTD temperature reference is required. Two mounting assembly options are available. The pH RUGGED ATC CABLE mounting assembly connects directly to the pH-RUGGED ELECTRODE and has a built in RTD probe, providing automatic temperature compensation (ATC). The pH-RUGGED PROBE cable assembly connects to the pH-RUGGED ELECTRODE and can be used with an external RTD probe or may be used with one of the resistor kits included with the MadgeTech pH loggers. Automatic Temperature Compensation is preferred, as it provides the best accuracy. When the precision and accuracy of ATC is not necessary, use the included resistor kit to simulate the temperature of the application to minimize error. Compatible MadgeTech Data Loggers: pHTemp101, pHTemp2000, RFHTemp101A. Resistor Kit: Reference the table included with the resistor kit to calibrate the resistor...