You have 0 items in your cart.
Products
testo 340 flue gas analyzer, incl. rechargeable battery, calibration protocol and carrying strap, equipped with O2 sensor, integrated flow/differential pressure measurement measurement range extension for Single dilution slot or optional for all sensors pressure-/ flow-measurement standard in every testo 340 automatic flow-controlled gas pump 18 standard fuels and additional 10 user-defined fuels – Fuel data is calculated using software easyEmission
testo 350 analyzer box, equipped with O2, incl. differential pressure sensor, temperature probe input Type K NiCr-Ni and Type S Pt10Rh-Pt, connection Testo databus, rech. battery, integrated combustion air probe (NTC), trigger input, measurement data store, USB interface, updatable to max. 6 gas sensors selected from CO, COlow, NO, NOlow, NO2, SO2, CO2 NDIR, CxHy, H2S Innovative: The application-guided operation with helpful instrument pre-settings Elegant and clear: The large colour graphic display Robust design: The sealed housing makes the testo 350 insensitive to knocks and dirt Cost and time-savings: The new service concept offers fast access to wearing parts
testo 350 Control Unit, displays measurement values and controls analyzer box, incl. rech. battery, measurement data store, USB interface and connection for Testo databus Operation of the analyzer box and transfer of the measurement data even when the flue gas pipe and the adjustment site are separated, especiall helpful for industrial burners, for example. Measurement data can be transferred from the analyzer box to the control unit. This means the analyzer box can remain at the measurement site for further measurements, and the control unit taken away in order to process the measurement data. In order to protect the display in measurements over a longer period or during transport to different measurement sites in a system, the control unit can be attached to the analyzer box face-down.
electronic gas leak detector with flexible measurement probe, mains charger and earphones Optical and audible alarm with bar display for increasing and dangerous gas concentrations Integrated pump Trend display shows maximum leakage Flexible measurement probe for inaccessible places Meas. range10 ppm to 4,0 Vol. % CH4 10 ppm to 1,9 Vol. % C3H8 10 ppm to 4,0 Vol. % H21st alarm limit200 ppm CH4 100 ppm C3H8 200 ppm H22nd alarm limit10.000 ppm CH4 5.000 ppm C3H8 10.000 ppm H2Battery life6 h
The TIM001is the most popular ultrasonic thickness gauge sold in Australia. It is a low cost, hand-held microprocessor controlled thickness gauge specifically designed for measuring the thickness of metallic and non-metallic materials e.g. aluminium, titanium, plastic, plastics, ceramics, glass and any other good ultrasonic wave-conductor as long as it has parallel top and bottom surfaces.
Introduction:Name: Probe for Ultrasonic Thickness GaugeModel: PT-08 (Lemo 00 connector)Frequency: 5MHzDiameter of the contact proportion: 8mmMeasuring Range: 0.8mm-300.0mmAvaliable Contact Temperature: ﹣10ºC-60ºCApplicaiton: use for all Ultrasonic thickness gauge
1. Capable of performing measurements on a wide range of material, including metals, plastic, ceramics, composites, epoxies, glass and other ultrasonic wave well-conductive materials. 2. Transducer models are available for special application, including for coarse grain material and high temperature applications. 3. Probe-Zero function, Sound-Velocity-Calibration function. 4. Two-Point Calibration function. 5.Coupling status Indicator showing the coupling status. 6. Battery information indicates the rest capacity of the battery. 7. Auto sleep and auto power off function to conserve battery life. 8. Optional software to process the memory data on the PC. 9. Optional thermal mini-printer to print the measured data via RS232 port. 10. Adjust gain function ,can easy to test the cast iron material.
Color 320x240 Pixels Display A-Scan Snapshot Echo-Echo Mode(Thru Paint & Coatings) Stores 100,000 Readings Gain: Low, Medium or High for varying test conditions