You have 0 items in your cart.
Products
Sub Categories
The FlyInspector is a PC-independant system for the optical inspection and consists of a high-resolution CCD auto focus camera mounted on a self-balancing arm. The system is available as FlyInspector 10 with 10x optical zoom and as FlyInspector 20 with 20x optical zoom.As of now, the FlyInspector is also available with a 30x optical zoom The user’s eyes do not risk overstraining any more, because he looks at the inspection objects on a large screen instead of constantly peeping through an ocular. The screen may be installed above or by the side of the working field and delivers an excellent image with its 24 mio. colors. The autofocus sensor makes focusing superfluous; the user simply zooms in or out. Thanks to the double radius and the ball-and-socket-joint at the camera, objects can be inspected from various sides and angles. The LED ring light mounted at the camera head provides optimal illumination of the objects. The FlyInspector is the ideal tool for the optical inspection in any field of application. The FlyInspector HD shows images in full HD resolution with 30fps and 2 million pixels on a respective screen. When used with a suitable framegrabber supporting this...
The BasicInspector is the most basic and cost-efficent variant of our inspection systems without any loss of image quality or resolution. The system uses the same camera as our EasyInspector, i.e. images are shown at Full-HD resolution (1920x1080 pixels) with 30 FPS (frames per second) on a 24" TFT display. The LED ring light fitted at the camera provides the optimal illumination of the objects. Due to its lightweight design, the BasicInspector can be carried around easily. When used with a suitable framegrabber supporting this format, the images can also be saved with the IMXpro software. Characteristics Can be upgraded with: compact design, small dimensions, lightweight easy handling ergonomic working position large working distance camera height adjustable included LED ring light HD resolution with 1920x1080 pixels up to 155x magnification (on 24" monitor) 10x optical zoom autofocus remote control self-sustaining system, PC independent polarisation filter UV-ring light frame grabber for PC software IMXpro PC-independent image storage solution Technical Details Dimensions...
* Professional bench type milliohm meter.* 20 m /200 m /2 /20 /200 /2 K /20 K ohm.* 20,000 counts, Jumbo LCD with back light.* Hi / Lo warning, 4 wires terminals, Kelvin clips is included, 0.001 milliohm resolution.* Judgement output : Low/Good/High port, used for the automatic machine to select the components (good or no good).* Power : AC 110V or AC 220 V/AC230 V.
Maximum test current of 10A (60 mΩ) Best resolution of 1μΩ, (accuracy 0.05%) Measures resistive and inductive materials Selection of 6 Current ranges - Manual or Auto Programmable Hi-Lo alarm with memory of 20 readings Auto-display of: • Hi (readings higher than Hi-Limit)• Lo (readings lower than Lo-Limit)• Pass (readings between Hi-Limit and Lo-Limit) Memory of 3000 sets of data Measure cable length in metric and imperial units Cummunicate with PC via USB or RS232C Rechargeable batteries and AC Adapto
3-1/2 digit LCD display with maximum reading of 2000. Low battery indication. Zero adjustment: External zero adjustment control. Very low impedance measurement, four-wire type, one pair insulated clip. Wide measurement range 1 milliohm to 20k Ohm in six switchable steps. Fuse protection: 2 Amp/250Volt (5mm x 20mm), fast minimum interrupt ratings 1500A. Function keys: D-H switch lockup readings for LCD display. Dimensions: 160mm (L) x 100mm (W) x 52mm (D) Weight: 700g approx.
FEATURES ● Microprocessor-controlled.● Measure down to 1μΩ.● 6 ranges from 2.000mΩ to 200.0Ω.● Maximum resolution of 1μΩ.● Three test currents with over-temperature protection.● Four terminal measurement.● Protection against inadvertent connection to over- voltage. (crow bars for current and voltage)● Clear & large LCD.● Potential lead resistance and current lead resistance checks.● "Full-featured” EnerSave™ Inside.● EnerSave™ Auto-hold.● EnerSave™ Auto-off.● Rechargeable battery operated● Robust & compact.● Indicators show if reading may be invalid (RP, RC, and temperature).● "O-Ring” sealed case. SPECIFICATIONS Low resistance ranges / resolution 0-2.000mΩ / 1μΩ 0-20.00mΩ / 10μΩ 0-200.0mΩ / 100μΩ 0-2.000Ω / 1mΩ 0-20.00Ω / 10mΩ 0-200.0Ω / 100mΩ Accuracy 0-2.000mΩ : ±(5%rdg+5dgt) 0-20.00mΩ : ±(4%rdg+4dgt) 0-200.0mΩ : ±(4%rdg+4dgt) 0-2.000Ω : ±(3%rdg+4dgt) 0-20.00Ω : ±(2%rdg+4dgt) 0-200.0Ω : ±(2%rdg+4dgt) Test current (dc) 2.000mΩ to 200.0mΩ :...
FEATURES* 4 terminal devices for accurate measurement of very low resistance.* Ideal for measuring the resistance of components precisely.* Ideal for testing protective conductors, lightning conductors and welded points.* Maximum test current is 10A ( 60000uΩ range only ).* Have two working mode , Resistive and Inductive mode, Normal is resistive mode.* Good / Fail set-function for input quality control.* Built-in in buzzer sound (GOOD STATUS) to assist the Q.C. judgment.* Especial "CALCULATE" function to measure cable / wire length.
Advantages ● Resolution: 0.1 μΩ ● Test current adjustable up to 200 A ● Automatic mode: 50 A, 100 A, 150 A and 200 A ● Unlimited test duration up to 100 A ●Safe measurements: Both Sides Grounded (BSG mode) ● Internal cooling system ● Storage of up to 8,000 measurements ● Site-proof casing for difficult environments Description The C.A 6292 is supplied in a site-proof casing with clearly-identified connection terminals to limit the risk of errors while also allowing quick connection of your measurement leads. The measurement results are displayed instantaneously on the LCD screen, which is backlit for easy reading. The C.A 6292 can be configured using the rotary knob on the instrument or via a PC with the USB link. The C.A 6292 can be used to measure in total safety for both people and equipment. The BSG method allows you to maintain the earthing on both sides of the object tested in order to remove any risk due to electromagnetic induction phenomena. In this mode, the optional MR 6292 clamp can be used for current measurements up to 50 ADC. The C.A 6292 can store in memory up to 8,000 measurement results. Accurate measurements According...